Start Kill Dual Relay Unit
KNR-2A
Installation Not Included
Barcode: 4571114024580
• Made for Push Start vehicles, this Normally Open dual relay unit prevents starting while Armed by individually cutting 2 engine start signal wires.
• Compatibility confirmed on: Lexus ES, LS (50-series), LX, RX (20-series), & Toyota C-HR, Alphard/Vellfire#30, Voxy/Esquire/Noah#80, Camry#70, Crown2#0, Hi-Ace#200, Harrier#60, Prius#50, Land Cruiser#150/200
( Wiring Guide)
Main Unit Size：74x50x30mm (tab excluded)
Avg. Current Consumption：0.8mA (Armed)
Waterproof Pin Switch
S-114R
Installation Not Included
JAN: 4996327026716
Hood pin switches are useful add-ons if you wish to have Hood trigger detection but your car cannot detect Hood opening by CAN of if your card doesn't have a factory pin switch. But even if your car can detect the Hood by can, it will show on Trigger Memory (Status LED flashes) as a Door trigger unless you install a pin switch like the S-114R.
Alternative pin switches: S-114 & S-111
2pc Remote & Antenna Kit
TR365D
Installation Not Included
Barcode: 4996327084297
TR365S 1pc Remote & Antenna Kit: ¥10,000 + tax (Barcode: 4996327084303)
Seamless integration with Factory Keyless!
Recommended for easy Disarming when you enable Relay Attack & CAN Invader Mitigation.
Button cell battery included. Battery is not covered under warranty.
Never install the Antenna Unit within a metal structure inside the car that could block RF. And never mount in a location exposed to constant sunlight.
This kit is not compatible with windows that have metal particle (heat reflective) coatings applied. Such coatings block RF.
The remote is not waterproof or shockproof. Drops on hard surfaces or into water is not covered under warranty.
2-way Pager & Antenna Kit
TR537S
Installation Not Included
Barcode: 4996327063940
Keep pager and factory keyless fob 10cm apart to avoid RF interference. Interference could prevent the fob or pager from working properly.
One AAA battery included. Battery is not covered under warranty.
The "CALL" button on the Antenna Unit has no function.
Never install the Antenna Unit within a metal structure inside the car that could block RF. And never mount in a location exposed to constant sunlight.
This kit is not compatible with windows that have metal particle (heat reflective) coatings applied. Such coatings block RF.
The pager is not waterproof or shockproof. Drops on hard surfaces or into water is not covered under warranty.
12V Power Stabilizer
UPS-47
Installation Not Included
Barcode: 4571114024863
Our Enhanced 1480 has an advanced SEPIC power supply which eliminates the need for the UPS-47 in most cases, but if you find that vehicle battery voltage is dropping below 2.9v for brief instances, the UPS-47 might be the solution. It adds diode-isolated capacitance to the main power power of the 1480 control unit to better ensure the security system remains alive during transient voltage drops.
( User Guide)
Before buying the UPS-47, get your car battery checked. Voltage drops below 3.0v are highly unusual. It could be your battery needs charging or changing.
Very low temperatures in the winter can cause even lower car battery voltage drops.
PATENTED CAN-BUS Technology
DIGI∞LINK Smart Security, Battery Backup Siren
1480B
DISCONTINUED
CLICK for NEW 1480Price: ¥58,000 + tax
Installation Not Included
Barcode: 4996327063933
PATENTED CAN-BUS Technology
DIGI∞LINK Smart Security, Normal Siren
1480S
DISCONTINUED
CLICK for NEW 1480Price: ¥51,000 + tax
Installation Not Included
Barcode: 4996327063926
1480 models "B" & "S" are exactly the same except for the Siren.
Click the retail Prices above for currency conversion, but note we offer discounts (see General Help > Q6) for customers outside Japan.
Factory alarms don't prevent car vandalism and theft like VISION security systems can.
Body Shock
2-stage shock detection. Light shock triggers Warning chirps. Hard shock triggers 30s siren.
Door Open
If any door or the trunk is opened while Armed, the siren blasts for 30s.
Ignition ON
If a thief turns ON the Ignition while Armed, the siren blasts for 30s.
IMPORTANT — PLEASE READ
VISION 1480 products connect to your car by way of digital CAN-BUS. NEVER purchase a 1480 product online without first verifying if it has been flashed with the correct firmware for your specific car! Installation is not possible for every car. ALWAYS consult our Compatibility PDFs before you buy. If you find that your car is incompatible with the 1480, it's likely our 1460 (analog-installation model) will be compatible. The advantage of the 1480 over the 1460 is faster and easier installation.
Speed-Lock is not longer a feature of our Enhanced 1480. To add that feature, please purchase one of our Speed-Lock products.
The 1480 was engineered to work well with our Speed Lock products and with any 3rd party CAN-BUS products too, but some badly designed CAN-BUS products from other companies continually blast the car's ECU with data, such that our 1480 cannot function properly. If you have no other CAN-BUS aftermarket products installed in your car, the 1480 will work great (so long as your car is compatible with the 1480). We simply cannot guarantee our 1480 will work perfectly if you combine it with another company's CAN products which might misbehave.
Because vehicle firmware programmed into the 1480 for your car may be specific to your car, it could be that if you buy a new car in the future, the firmware in your 1480 may not be compatible. We might be able to upgrade the firmware for you for a nominal upgrade fee if you ship your 1480 control module back to us in Japan. But that would only be possible if your future new car is listed on our 1480 Compatibility PDFs at that future time.
If your car is listed on our Compatibility PDFs but it was made outside Japan, there is the possibility the CAN data could be different. Please consult with us so we can investigate. If your car was made in Japan though, there should not be any compatibility problems, assuming the importer to your country did not modify the ECU in any way.
The 1480B includes a siren with internal backup battery that lasts about 3 years. Even after the battery dies, the siren will continue to operate. That battery is glued inside and is not replaceable. Backup sirens also come with 2 keys to allow you to kill the siren sound easily. We cannot issue replacement keys, so please keep 1 key in a safe location.
The 1480 may flash vehicle Hazard or Parking lamps, depending on the vehicle. Light flash is not possible on some cars by using CAN-BUS signals. Consult our Compatibility PDFs for details about your car. However, our Enhanced 1480 now offers an analog (–) Light Output wire that can be connected to the Hazards or Parking lights (relay may be required).
If you open a door while the Ignition is ON, the 1480's Status LED will flash until the door is closed. This is normal and cannot be disabled.
REMOTE STARTERS. In 2014, we become aware that some factory Remote Starters and 3rd party Remote Starters use a dedicated "Door Open" signal output wire to trick the vehicle into thinking a door has been opened after the Remote Starter shuts off the engine. This "door open" signal wire is needed to trigger the Headlights to shut off, on cars that have an Auto Light feature. The problem is that the Door Open signal will trigger our 1480. The SOLUTION is to turn OFF Auto Light (usually at your light switch) and disconnect the remote starter's "Door Open" signal wire. In cases where that does not work (for example, if your Remote Starter connects via CAN-BUS), you would need to Disarm before the engine shuts down (which may not be possible on some cars), or disable the remote starter altogether, or simply not install our 1480. Please note that we do not sell remote start systems.
Please only use the included Posi-Tap connectors when making CAN connections. NEVER use electrotaps. Even soldered connections are commonly found to be inferior to Posi-Tap connections when solder is applied by an inexperienced installer.