Copyright © 2002-2018 KIRAMEK, Inc.

Designed for 24V vehicles that have Factory Keyless or SMART

Product Photo

PLEASE NOTE:
1. System Arms & Disarms when you Lock & Unlock using SMART or factory keyless.
2. When a door is opened while Armed, the vehicle Horn will blast (pulsed) and Parking Lights will flash.
3. Any attempt to start the engine while Armed will also trigger the Horn and Parking Light flash.
4. Starter Kill relay prevents engine starting.

MANUAL
RelayAttack

 24V Immobilizer System

2460HBACKUP

 MSRP: „ 32,000    

Installation Not Included

 (Tax not included.)

JAN: 4996327093725

Feature Icons

• See System Comparison Chart for details.
• Yellow icons above show optional paging system features.

Arm/Disarm with Your Factory Remote!

Arm/Disarm with Factory Remote

LOCK

UNLOCK

2460H Top Features

2460H Feature Highlights

N

O

T

E

S

1:

Compatible vehicles must have "factory keyless" installed (not a 3rd party keyless kit), and vehicle hazard lights must flash after pressing the factory remote's LOCK or UNLOCK buttons. (See #4 below for a partial exception to this rule.)

2:

Not compatible if vehicle hazard lights flash when the driver's door is unlocked with the metal key. (See #4 below for partial exception.)

3:

Not all third party electrical customizations may be compatible with the 2460, especially if they interfere with the 2460's ability to properly read the door lock motor signals and the hazard light flashes.

4:

Installation of the 2460 is possible in the following cases when you purchase either the TR537S or TR365:

  • Vehicles without factory keyless or SMART.
  • Vehicles that have 3rd party factory keyless and/or on vehicles where you use the metal key in the driver's door keylock and see the hazards flash.
  • Vehicles that do not have a 24V door lock motor signal (e.g., vacuum pump systems)
  • Vehicles where the hazards flash BEFORE the door lock motor signal appears.
  • When you want to sleep in the vehicle with the engine running. You need an optional remote to Arm while Ignition is ON (when Ignition trigger is disabled).

NOTE: The 2460 does not add keyless to the vehicle, nor does the 2460 offer door lock motor control. In other words, if your vehicle does NOT have factory keyless entry, the 2460 can only be controlled by the optional TR365 or TR537S remotes, and doors will not Lock/Unlock when you Arm/Disarm. As such, the 2460 is most convenient on vehicles that have compatible factory keyless entry and hazard flash.

TR537S: OPTIONAL 2-WAY Pager & Antenna KitTR365S & TR365D: OPTIONAL 1-WAY Transmitter & Antenna Kit

* You can install the 2460H to vehicles without factory keyless or SMART only if you purchase an optional TR537S or TR365-series remote. In addition, you will need to purchase the optional 318-16R if you wish to have Door Lock Control when you use your optional remote to Arm and Disarm.
* Door Lock Control not supported on cars with factory alarrms.  *Vehicles with metal particle film on the windows will severely limit wireless range.
* Never attach the Antenna Unit to metal or inside the pillars in either side of the front windshield.  *Included battery not covered under warranty.

* Always keep the 2-way pager remote and your SMART key fob at least 10cm apart to avoid RF interference and malfunction of the pager.
* You can install the 2460H to vehicles without factory keyless or SMART only if you purchase an optional TR537S or TR365-series remote. In addition, you will need to purchase the optional 318-16R if you wish to have Door Lock Control when you use your optional remote to Arm and Disarm.

318-054: OPTIONAL 2-Stage Shock Sensor318-16R: OPTIONAL Door Lock InterfaceLM801-series Anti-Theft Scanning LEDs
Feature Highlights

Door-open
Trigger

Controlled by SMART
& factory keyless

Includes Starter
Kill Relay

Parking Light
Flash

No Factory Remote?  No problem.  Just add a remote.

Home  >  Systems  >  2460H

VISION 24v Truck Immobilizer

VISION Security Systems